5 Factors to contemplate when choosing irrigation pump

rrigation pumps are usually used to pump water from a lower to the next degree from which the water then flows by way of channels to the fields requiring irrigation or to lift it to the required strain head so as to spray the fields through piping systems (sprinkling). The heads concerned vary from approx. 1 m for regular lift operation to forty m for sprinkling. Ocassionally, heads greater than a hundred m may be required.
At times, irrigation pumps are normally not outfitted with variable pace drives. The flow price can due to this fact be managed by either switching the pumps on and off, or through the use of a throttling valve within the discharge pipe, pre-swirl management (e. g. cooling water pumps), rotational velocity or impeller blade pitch adjustment. Both horizontal and vertical pumps (e. g. tubular casing pump) are used as irrigation pumps.
For more than 2,000 years farmers have used irrigation to develop food for the world. However, this doesn’t mean that all irrigation strategies are equally useful. Knowing what will work finest in your scenario requires data about the choices available, including the benefits and drawbacks of each. With that in mind, here is a have a look at five issues to contemplate in getting water to your crops:
1. Soil sort. The type of soil in an area can affect not solely the kind of irrigation technique used but also the irrigation run occasions. Sandy soils typically require frequent functions of water at a high fee to maintain moisture within the root zone. Clay soils has a characteristic of holding moisture longer that sandy soils, even so, this will require frequent purposes at a decrease fee to prevent runoff.
2. Land topography. When it comes to land issues, hilly or sloping land could be a challenge. Drip irrigation works well if the laterals may be run alongside topographic strains. Often system run occasions may have to be adjusted to prevent runoff. Travelers and center pivot systems are normally out of the query on hilly and severely sloping land.
three. ราคาpressuregauge . In this case, sprinklers are less desirable in areas where excessive winds are widespread and in arid areas with a low humidity since water losses because of evaporation may be extremely excessive. Drip irrigation works properly for both of the above talked about conditions.
4. Type of crops grown. Sprinkler and drip methods can require high levels of investment. Therefore, it’s better to reserve their use for high-value crops like greens, small fruits and orchard crops quite than making use of them to commodity crops like wheat and soybeans.
5. Water high quality. All drip irrigation methods require some kind of filtration. Overhead systems such as sprinklers seldom require filtration. Irrigation water must be tested for water borne pathogens. Depending on the crop grown and irrigation method used chlorine injection may be required. Other water high quality points that could be of concern embrace levels of soluble iron and different dissolved minerals.
Share

Leave a Comment