What is the dissipation loss for a pressure transmitter?

The term ?dissipation loss? can be found in the info sheet for a pressure sensor or pressure transmitter. One needs this specification in order to be able to protect the pressure sensor from overheating.
In case a pressure sensor is operated in a hot environment, it usually is necessary to limit its electrical energy. If one neglects this aspect, one possibly risks an overheating sufficient reason for this, in the worst case, a total failure of the instrument. Just how can the correct electrical connection be managed?
Determination of the right electrical connection based on the dissipation loss
First, the maximum permissible electrical power for the pressure sensor must be known. That is given in the data sheet as the dissipation loss. Please be aware that the dissipation loss can be dependent upon the maximum expected operating temperature of the instrument and must be calculated where necessary.
If the allowable dissipation loss has been determined correctly, then your actual maximum electrical energy for the pressure sensor that occurs could be determined. The determination can be executed expediently in two steps:
1. Determination of the voltage at the pressure transmitter utilizing the following formula:
UPressure transmitter = UVoltage source ? RLoad � Imax. Current supply
2. Calculation of the utmost electrical power for the pressure transmitter through the following equation:
PPressure transmitter = UPressure transmitter � Imax. Current supply
The maximum electrical energy for the pressure transmitter (PPressure transmitter), that is now known, should be smaller compared to the permissible dissipation loss. If Impatience is actually the case, both the power supply (UVoltage source) and the strain (RLoad) were properly calculated and the electrical power of the pressure sensor will be within the permissible range under all operating conditions. Consequently, the pressure transmitter won’t heat too strongly and can withstand the required operating temperatures.
Note
In the event you need any advice, your contact will gladly assist you to.

Leave a Comment